Technical Data; Identification - Nameplate (Fig. 2); Transportation (Fig. 3); Receipt And First Cleaning - Arneg Valencia Installations- Und Bedienungsanleitungen

Valencia
English
4.

Technical data

Descrition
CODE
Length, endwalls excluded
Thermostatic valve Field N
Evaporator fan
Lighting
Refrigerating power
Thermostat
Working temperature
Allowed temperatures (Ts) 97/23 CE
Display area
Refrigerant
Max allowed pressure (Ps) 97/23 CE
Defrosting type
Recommended defrosting/24h
Power supply - Frequency - Phase
Weight
Loading volume
Noise level
THE TECHNICAL DATA AND CHARACTERISTICS MAY BE SUBJECT TO CHANGE OR IMPROVEMENTS WITHOUT NOTICE.

5. Identification - Nameplate (Fig. 2)

The technical nameplate is situated on the back of the cabinet with all the technical characteristics:
1 Manufacturer's name and address
2 Name and length of the cabinet
3 Cabinet code number
4 Cabinet registration number
5 Power supply voltage
6 Power supply frequency
7 Max. absorbed current
8 Electric power absorbed at steady state during refrigerating phase (fans + hot cables +
illumination)
9 Electric power absorbed at steady state during defrosting phase (armored heating elements + hot
cables + fans + illumination)
10 Illuminating power (where applicable)
11 Useful display surface
12 Type of refrigerating gas used in the appliance
13 Mass of refrigerating gas loaded in each appliance (only for cabinets with incorporated motor)
14 Environmental climatic class and reference temperature
15 Class of protection against humidity
16 Manufacturing job number of the cabinet
17 Manufacturing order number of the cabinet
18 Manufacturing year of the cabinet
In case of technical service request, please communicate the following information for the
identification of the cabinet:
- product name (Fig. 2 - 2);
- registration number (Fig. 2 - 4);
- job number (Fig. 2 - 18).

6. Transportation (Fig. 3)

The cabinet is fitted with a wooden support fixed to the base for handling by means of fork-lifts.
Use a manual or electric lift truck suited for raising the cabinet in question (Rif. 3).

7. Receipt and first cleaning

Upon receipt of the cabinet:
- Make sure that the packaging is intact and that it is not evidently damaged;
- Unpack the cabinet with care so as not to damage the cabinet itself;
- Check each single part of the cabinet making sure that all its components are intact;
16
U.M.
06186502
1250
mm
TES 2-1,2
2 x 38
no. x W
1 x 36
W
2210
W
-
°C
Max +32°C Min.-10°C
°C
2
3,78
m
bar
no. x min.
V - Hz - Ph
kg
3 974
dm
dB(A)
Valencia
06186504 06186506
1875 2500
TES 2-1,7 TES 2-1,7
2 x 38 4 x 38
2 x 30 2 x 36
3315 4420
IR32SE
+2°C / +4°C
5,67 7,57
R404A
20
off-cycle
4 x 15 min.
230 - 50 - 1F + N
1460 1947
06186509
3750
TES 2-2,2
6 x 38
3 x 36
6630
11,35
2921
05060075 00 01/03/2007