Fixing The Mounting Frame To The Support Arm - Lenze L-force Controls CS 5800 Montageanleitung

4.2.2

Fixing the mounting frame to the support arm

Without add−on component

1
How to proceed:
1. Check support arm system for professional mounting and sufficient
carrying capacity.
–
See support arm documentation.
2. Stick the self−adhesive seal 0 on the adapter plate 1 on the side with the
threaded bolts.
3. Pull the connecting cables 2 out of the support arm 3 and screw the
adapter plate 1 to the support arm 3.
–
For screws see support arm documentation.
4. Screw the mounting frame 6 to the adapter plate 1.
4 nuts M5 with washers Æ 5.3 mm
–
Now you can connect the Command Station (¶ 35).
MA_CSx8xx DE/EN/FR/ES/IT 2.0
Fixing the mounting frame to the support arm
3 1
‚
0
l
Installation
Mounting steps
1
ƒ
2
4
6
CS57x0−005
31