Sony VPL-CX236 Kurzreferenz Seite 48

Correcting deflection 2-The top/bottom edges of the image
1 Move the s by using V/v/B/b to select
the corner you want to correct.
If you push ENTER, you can switch to the
cursor display.
2 You can adjust the deflection of the edges
by using V/v/B/b.
You can adjust the top position of the
edges by using B/b. For the range of
deflection, use V/v. You can adjust the
top/bottom edge independently.
Note
When adjusting the top position of the
edges, the top and bottom edges will be set
at the same time.
3 The cursor will disappear if the
adjustment range limit is reached.
Press the RESET key to restore the projected image before adjustment.
20
GB
Projecting an Image
Adjust using this cursor.
Example of cursor display:
You can adjust in all directions.
You can adjust only to the left/
right or downwards.