AbleNet Big Beamer Kurzanleitung

QUICK START GUIDE
Big Beamer™
wireless accessibility switch
WARRANTY
AbleNet manufactured products include a 2-year limited
warranty. This warranty is against defects in materials and
manufacturing for 2-years from the date of purchase. Full
warranty details available at www.ablenetinc.com.
AbleNet, Inc.
2625 Patton Road
Roseville, MN 55113
United States of America
(651) 294-3101
ablecare@ablenetinc.com
www.ablenetinc.com
Made with recycled content
EN June 18, 2021 1:53 PM
Product
1
Registration
Registering your product provides you
access to ableCARE, product updates,
and resources for your product. Scan the
QR code below to register your product.
Getting
2
Started
Scan the QR code below to watch a
short getting started video or follow
the instructions listed.
To get started:
1. Add two alkaline AAA batteries
to wireless switch (batteries not
included).
2. Remove clear snap cap and colored
switch top to access on/off switch.
Turn wireless switch on, then attach
colored switch top and clear snap
cap.
3. Turn wireless receiver on and
activate pairing mode on the
wireless receiver.
4. Activate the switch top on your
wireless switch to pair with the
wireless receiver
5. Turn pairing mode off on your
wireless receiver
6. Your wireless switch is now ready to
use with your wireless receiver.
Note: AbleNet wireless switches are
only compatible with AbleNet wireless
receivers and PowerLink 4.
This device can do more! Full Instructions
for Use are available at
www.ablenetinc.com.
Download the ableCARE app to access
live support from the ableCARE Product
Success team, an online knowledge base
filled with videos and getting started
information, and other resources.
Scan the QR code below to download
the free ableCARE app to your phone or
tablet.