Assignment Of The Dmx Channels In The Overview - involight Paint BAR UV12 Bedienungsanleitung

Auto Programs
Music-Controlled
(Sound)
Speed
Microphone sensitivity
Intensity
Master Dimmer
Silent-Mode
Slave Modus
Control via IR remote
control

3.3 Assignment of the DMX channels in the overview:

NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be correctly
operated and Programed with a DMX controller.
1 Channel Mode:
DMX Mode Channel
1 CH 1
Au 1
Au 2
Auto
Au 3
So 1
So 2
Soun
So 3
SP 1
SPEE -
SP 9
SE 1
SEnS -
SE 9
u000
CoLo -
u255
dI 1
dIMM -
dI 9
on
SILE
oFF
SLAV
on
InFr
oFF
Value Description
UV
000 - 255
Intensity 0% - 100%
Auto Program 1
Auto Program 2
Auto Program 3
Sound Program 1
Sound Program 2
Sound Program 3
Internal programs can be set in running speed
in 9 steps each. "1" stands for the slowest, "9"
for the fastest speed.
SENS: 1 = minimum sensitivity,
SENS: 9 = maximum sensitivity
UV,
Intensity 0% - 100%
Master Dimmer for internal Programs.
If the silent mode is activated "ON", the light
beams of the unit switch off (BLACKOUT) if no
further music signals (bass impulses) are
received.
If the silent mode is deactivated "OFF" - the
current program of the device will continue
slowly if no further music signals (bass
impulses) are received.
Master / Slave operation. Define the device as
"Slave".
IR remote control activated.
IR remote control de-activated.
17
square
wave
saw tooth
square
wave
saw tooth
Comments