Using The Screen; Mounting The Handlebar - URBANGLIDE RIDE 85s Bedienungsanleitung

Speed
On/Off button
Assembly
1.
2.

Using the screen

Speed indicator
Battery indicator

Mounting the handlebar

To assemble the handlebars of your scooter, follow these steps:
Insert the two handles into the handle of your scooter.
Screw the two handles
1. The battery indicator shows the remaining
battery level in real time.
2. To turn the scooter on, press the On/Off button,
to turn it off, press it for 3 seconds.
3. Once turned on, press the On/Off button once
to turn on the front light. Press it once more to
turn it off.
4. Once turned on, press the On/Off button twice
to change the speed mode. When the "S" is not
displayed, you are in first gear, when the "S" is
displayed in white, you are in speed two, and
when it is displayed in red, you are in third gear.