Safety Information - Helios KWL-WSU Montageanleitung

KWL-WSU
Art. no. 00856.002
WSUP
Art. no. 09990.001
Type KWL-WSU
KWL 230 Roto
KWL 250 ..
KWL 350 ..
KWL 650 ..
Type WSUP
KWL EC 200 Eco
KWL EC 300 Eco
KWL EC 500 Eco
Safety
Safety
Information
Information
The connection and installation of electrical
appliances must be performed by a skilled
electrician only. Any intervention into or
modifications to the appliance shall lead to
the lapse of all warranty rights. Comply with
your national regulations and all relevant
safety stipulations.
D GB F
1. Intended use
The clock timer is suitable for flush mounted installation in dry rooms. It regulates a week program
and takes over the controlling of the setback operation.
Mode of operation WSUP:
Mode of operation KWL-WSU: ON = Normal operation (controlling via operation switch, o. switch ON)
* With OFF the display does not correspond to the current performance level. On the operation switch the
Version
performance level is always shown, which is again activated after the setback operation. The setback
ex Vers. 001 operation can comfortably be determined in the normal "standard program" of the clock timer.
all
2. Features
ex Vers. 001
Overview per day of the
ex Vers. 001
programmed
Version
switching times
ex Vers. 001
5 = Friday
ex Vers. 001
ex Vers. 001
Channel
statuses
Service voltage OK
Two flashing dots.
Power reserve mode
Three flashing dots.
Selection
e.g.: Auto, Prog.
Abort input
ON = Change-over contact can be used freely (see page 7)
OFF = Change-over contact can be used freely (see page 7)
The KWL-unit is operated in the performance level activated at the operati-
on switch. With two-stage KWL operation the switching occurs into the
high performance level.
OFF* = Setback operation (controlling via KWL-WSU, o. switch OFF)
KWL is operated on the lowest performance level.
/
Reset
309 806_03
Display of special functions:
Permanent ON/OFF G
Holiday program active
Displayed only when summer/
winter time changeover is
activated
Summer time
@
Winter time
Current days of the week
1 = Monday, 2 = Tuesday, ...
The decision Yes confirms the
selection or programming
Decision No means continue
1