DVD Mode Configuration
1. While in DVD source, press "MYBUTTON1 -
button to access DVD Setup menu. This is only
possible if there is no playback.
2. This menu is operated using "
or " " buttons.
TV Type
TV Type is only available as 'PAL'. The TV set also
supports NTSC signal; however, the signal will be
converted to PAL when it appears on the screen.
This menu is used for setting language preferences
in DVD mode. Language menu contents are detailed
below:
OSD Lang
You can select the default OSD language of the
player menus.
Audio
You can select the default audio language if supported
by the DVD disc.
Disc Menu
You can select the DVD's disc menu language among
these languages. Disc menu appears in the selected
language, if supported by the DVD disc.
Subtitle
You can select the default subtitle language if
supported by the DVD disc.
Downloaded from
www.Manualslib.com
" or "
Video Setup
Language Setup
manuals search engine
DVD Mode
General Operation
"
These are the DVD mode preferences. Menu contents
are detailed below:
Default
If you choose Reset and press OK, the factory-presets
are loaded. Parental level and parental password
does not change.
Downmix
This mode can be selected when the digital audio
output of the TV is used.
Surround: Surround sound output.
Stereo: Two channels stereo.
Parental
Playing some DVD's can be limited depending on the
age of users. The "Parental Control" function allows
" and " "
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight
levels. Level "8 Adult" adjustment lets you watch all of
the DVD titles ignoring the DVD disc's parental level.
You can watch the DVD discs, which has the same
or lower parental level than the player's level only.
Password
Using this item you can change the current password.
To change the password you will be prompted to enter
your old password. After you have entered your old
password, you can now enter and confirm the new
4-digit password. You can use C button to delete the
incorrect entry(if it's available on your remote).
Note: Factory preset of the password is "0000". You
have to enter XXXX digital password every time you
want to change the parental level. If you forget your
password please contact technical service.
SPDIF OUTPUT
You can set Spdif Output as PCM or RAW. If you
select PCM from SPDIF Output in DVD menu and
play DVD with Dolby audio, you can get audio output
with two channels via the speakers and the SPDIF
Out. If you select RAW from SPDIF Output in DVD
menu and play DVD with Dolby audio, speakers will
be muted and you can get 5+1 Dolby audio via the
SPDIF Out.
English - 15 -
Preferences