Pioneer KURO PDP-LX6090H Bedienungsanleitung Seite 92

13 Using the HDMI Control
Note
• When using the HDMI Control functions, operate the remote
control unit while pointing it toward the remote control sensor
(t) located at the bottom right of the front panel of the flat
screen TV.
• You cannot use two or more HDMI terminals at the rear of the
flat screen TV at the same time except "Power Off" and "Display
Language Setup" functions.
On-screen control panel
For an AV system
HDMI Control
5
****
1
SURROUND+
6
INPUT- INPUT+
2 2
7
SURROUND-
3
Exit
4
Press  or  on the remote control unit of the flat screen TV to
switch the surround mode in order or in reverse order,  or  to
switch the input source in order or in reverse order. Pressing HDMI
CONTROL closes the control panel to return to the HDMI Control
menu.
Note
• You cannot operate the recorder/player when you press  or 
to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
HDMI Control
5
****
1
6
2 2
3
Exit
4 7
Press  or  on the remote control unit of the flat screen TV to
select fast reverse or fast forward mode,  to skip commercials or
 to stop playback. Pressing ENTER starts playback and HDMI
CONTROL closes the control panel to return to the HDMI Control
menu.
92
En
1 Switches the surround mode in
order
2 Switches the input source in
reverse order
3 Switches the surround mode in
reverse order
Closes the control panel to return
4
to the HDMI Control menu
5 Displays the model number of the
connected device
6 Switches the input source in
order
7 Void
1 Skips commercials
2 Fast reverse
3 Stops playback
4 Closes the control panel to return
to the HDMI Control menu
5
Displays the model number of the
connected device
6 Fast forward
7 Starts playback
For a player
HDMI Control
5
****
1
MENU
6
2 2
3
Exit
7
4
Press  or  on the remote control unit of the flat screen TV to
select fast reverse or fast forward mode,  to display the DVD disc
menu or Blu-ray disc's pop-up menu on the player or  to stop
playback. Pressing ENTER starts playback and HDMI CONTROL
closes the control panel to return to the HDMI Control menu.
1 Displays the DVD disc menu or
Blu-ray disc's pop-up menu on
the player
2 Fast reverse
3 Stops playback
4 Closes the control panel to return
to the HDMI Control menu
5
Displays the model number of the
connected device
6 Fast forward
7 Starts playback