Sharp KF-76VDD19W-DE Bedienungsanleitung Seite 25

the (+) and (-) buttons while the timer
is in his position. Some time after the
adjustment operation is completed, the
day's time will appear on the screen
and symbol (A) and will begin to
continuously light on the screen. While
doing this, the oven will also start to
operate.
A cooking period between the time
range of 0 and 10 hours can be set.
At the completion of the set duration,
the timer will stop the oven and give
an audible warning. Also, symbol
(A) will begin to flash on the screen.
After bringing the oven button and
oven thermostat button to 0 position,
pressing any button of the timer will
end the audible warning. Also, the
timer will be brought to the manual use
function.
Adjustment of the cooking end
time:
A
En d
This function is used to cook according
to desired finishing time. The food
to be cooked is put into the oven.
The oven is adjusted to the desired
cooking function. The oven thermostat
is adjusted to the desired degree
depending on the dish to be cooked.
Keep pressing the MODE button until
you see "end" on the timer screen,
symbol (A) and the day's time will
respectively begin to flash.
Adjust the finishing time for the food
you wish to cook, by using the (+)
and (-) keys while the timer is in
this position. Some time after the
adjustment operation is completed, the
current time will appear on the screen
and symbols (A) and will begin to
continuously light on the screen. While
doing this, the oven will also start to
operate.
You can set a time which can be up to
10 hours after the current time.
Upon completion of the set duration,
the timer will stop the oven and an give
audible warning. The the symbol (A)
will also begin to flash on the screen.
After bringing the oven button and
oven thermostat button to 0 position,
pressing any button of the timer will
end the audible warning. The timer
will also be brought to manual use
function.
EN - 19