Specifications - Orion XTR2504 Bedienungsanleitung

sPeCIFICAtIons

Amplifier section
Power output 4Ω (Watts) *
Power output 2Ω (Watts)
**
Power output 4Ω (Watts)
Bridged
Amplifier efficiency
signal to noise ratio at
rated output power and
lowest impedance
externally Bridgeable
Distortion at Rated Power
Frequency Response
Linear Bandwidth
Damping Factor
Input sensitivity
Input sensitivity selection
switch
supply Voltage Range
Protection
© 2008 Directed Electronics. All rights reserved.
XtR2504 XtR5004
50 x 4 80 x 4
70 x 4 125 x 4
250 x 1 500 x 1
> 60% into 2Ω load > 60% into 2Ω load
at max . power at max . power
>95dB >95dB
no no
0 .05% tHD+n 0 .05% tHD+n
20 Hz to 20 kHz +/- 20 Hz to 20 kHz +/-
2 .5dB 2 .5dB
20 Hz to 30 kHz 20 Hz to 30 kHz
+/- 3dB +/- 3dB
> 100 > 100
200mV to 8V 200mV to 8V
Yes Yes
9 to 16V 9 to 16V
thermal, DC offset, short protection,
under-voltage
Amplifier section
terminal Wire Gauge
Input Impedance
Balanced Line Inputs
Dimensions (inches)
Crossover section
High Pass Crossover
Low Pass Crossover
Bass Boost
* Continuous 4Ω load 20Hz to 20kHz, < 1% tHD, with input voltage at 14 .4 VDC .
** Continuous 2Ω load 20Hz to 20kHz, < 1% tHD, with input voltage at 14 .4 VDC .
XtR2504 XtR5004
Power 4 AWG Power 4 AWG
Remote 12 AWG Remote 12 AWG
Ground 4 AWG Ground 4 AWG
speaker 12 AWG speaker 12 AWG
20kΩ 20kΩ
Yes Yes
11 .5"x 9 .3"x 2 .5" 14 .25"x 9 .3"x 2 .5"
Continuously vari- Continuously vari-
able (50-2 kHz) able (50-2 kHz)
Continuously vari- Continuously vari-
able (50-2 kHz) able (50-2 kHz)
0-18dB variable 0-18dB variable
5