CLE ANING THE APPLIANCE
DISASSEMBLY AND CLEANING
1.
Take off the upper part of the BONECO appliance.
2. Remove the drum with the AW200 evaporator mat.
3. Take out the A7017 Ionic Silver Stick
4. Remove the float gage.
5. Rotate both drum discs to loosen. In doing so, ob-
serve the markings on the outer side of the disc.
.
®
6. Remove the AW200 evaporator mat from the drum.
7.
Clean the water base, the float gage and the drum
either by hand or in the dish washer at a max. tem-
perature of 50 °C.
8. Put the appliance back together by following the
steps in reverse order.
25
en