Automatic Switch-Off; Low Battery; Cleaning And Care - Duronic KS3000 Bedienungsanleitung

The tare function is also useful for weighing different ingredients into the
measuring bowl as you go along, for instance once you've added the first
ingredient to weigh, press the "ON/TARE" button and the scale will return to
zero "0", which allows you then weight the next ingredient accurately.
Automatic Switch Off
The scale will automatically switch off after 60 seconds of no use. Manual
Switch Off
You can manually switch the scale off at any time by pressing and holding
the " " button for 2 seconds.
ON/TARE
When using this scale, please ensure it is used on a dry, flat even surface.
The scale is not waterproof, therefore should not be exposed to moisture or
submerged under water.
To clean the scale, use a slightly damp cloth to wipe over it. Do not use any
chemical or abrasive cleaning products to clean the scale.
If you plan to not use the scale for a long time, remove the batteries before
storing away.

Low battery

This symbol gives advance warning that the battery
will run out soon.
No battery power remaining This means it's time
to change the batteries.
Unstable weight
This is shown when weight is not stablised or the
scale is not on an even surface.
Overload
This means that the maximum weight limit has
been exceeded. Remove some ingredients to
prevent damaging the scale.
Before you turn on the scale, the scale detects that
there is something on the scale which weighs over
1000g. Remove the items from the scale, wait until
it displays zero, then you can start weighing.

Cleaning and Care

6