Emerio AC-125508.1 Bedienungsanleitung Seite 7

11. Indicator light of swing function
12. Indicator light of cooling function
13. Indicator light of timer
14. Indicator light of sleep mode
15. Indicator light of natural mode
Remote control
This unit has a remote control. One piece of CR2025 battery will be provided with the remote control. Before
starting to use the remote control, remove the plastic protection from the battery. If you want to change the
battery, please refer to the instruction behind the remote control. If it is not in use for a long time, please take
the battery out of the remote control. The functions of the remote control buttons are the same as the
functions of the buttons on the control panel.
During use, align the remote control to the control panel (the remote control receiver is on the control panel);
the remote control will not work if the control panel is blocked.
BEFORE USE
1. Pull the appliance out from the carton and place it on a solid heat-resistant horizontal surface.
2. Check if the accessories are complete including: two ice boxes, one remote control, two wheels with brake
and two wheels without brake.
3. Insert four wheels into the corner holes and ensure the wheels are assembled tightly. Make sure the two
wheels with brake are assembled at the front side of the appliance. (If you need to lock the wheels, just
press down the brake lever.)
HOW TO USE
1. Turn the water tank lock to the horizontal position. Pull out the water tank slowly to leave 1/3 of the water
tank in the appliance body. Add water into the water tank. If you need the air sent out much cooler, put
the ice boxes (add water and frozen first) into the water. Make sure the water level is between the MIN
and MAX line. Check the water level from the water level window in the front side of the appliance.
Important! Use of the ice boxes:
Add water into the ice boxes; do not exceed the MAX line on the ice box when adding water into it. Screw
the cap tightly to make sure there is no leakage of water droplet. Keep the ice boxes away from children to
prevent ingestion. Freeze the ice boxes by placing them horizontally instead of standing vertically in the
freezer to avoid deformation.
Warning: the water level of the water tank must be less than "MAX" after the ice boxes are put into the
water tank.
2. Plug the appliance into the appropriate power outlet. A beep sound will be heard and the indicator light of
power will be on. The appliance is in standby mode.
3. Power button:
Press the power button to start the appliance. The appliance will work at low wind speed and the
corresponding indicator light will be on.
Press the button again. The appliance will enter into standby mode.
Note: In standby mode, the unit will retain speed setting, swing function, cooling function and working
mode of the former settings when turn on the unit again; but if you pull out the plug from the socket, the
former settings will all be lost.
4. Wind speed button:
Press the wind speed button to adjust the wind speed: "Low" = low wind speed; "Mid" = medium wind
speed; "High" = high wind speed. The corresponding indicator light will be on.
5. Swing button:
Press the swing button to turn on the swing function. The corresponding indicator light will be on. The air
flow will swing left and right. Press the swing button again to cancel the swing and fix the air flow at a
specific direction horizontally. To adjust the air flow direction vertically, just lift up or press down the
louver outside.
- 6 -