Do not place the appliance and its lead on or near a surface which is likely to become hot
(cooking plate, gas burner, oven, etc.).
Place the appliance on a stable and dry surface, slightly away from the edge and further than
20 cm away from any wall and heat-sensitive element.
Caution: Do not insert aluminium foil or any other material or object between the plate and the
frame (ventilation zone).
Do not obstruct the ventilation holes in the bottom plate under the frame.
Do not obstruct the frame's ventilation inlets.
Warning: do not use this appliance with charcoal or an energy source other than the one it was
designed for (electric power).
Disconnect the plug when the appliance is not in use or before cleaning it.
Leave the appliance to cool down before handling or cleaning it.
Do not handle the appliance when hot.
Do not clean the appliance with a high or low pressure water spray.
Do not use chlorinated products to clean stainless steel.
When the appliance is not in use, store it in a dry location.
We advise you to keep the original packaging to store the appliance.
Do not connect or use an appliance with a damaged lead or plug. If the power supply cable is
damaged it must be replaced by the distributor, its after-sales service or qualified persons to
avoid any danger.
In the event of a failure, inspection and repairs must be performed by an approved technician.
Any maintenance operations must be performed by an approved technician.
The appliance is not intended to be operated using an external timer or a separate remote
control system.
KEEP THESE INSTRUCTIONS
Technical description
CHARACTERISTICS
Stainless steel frame and cooking plate
Food-grade certified plate
IPX4 certified appliance (total protection against water spray)
Edges on the 4 sides
Built-in removable cooking residues tray
4 feet including 2 adjustable ones
Single phase 230 volt power supply
- 11 -