Auriol IAN 96385 Bedienungs- Und Sicherheitshinweise Seite 15

with the outdoor sensor. This process can take a
few minutes. The symbol flashes. Once the de-
vice has successfully connected to the external
sensor, the symbol stops flashing and the tem-
perature is shown in the LC display.
Note: If the weather station does not receive the
signal from the outdoor sensor within 3 minutes,
the weather station automatically starts with the
reception of the radio time signal.
After successful reception of the outdoor sensor
signal or after 3 minutes, the weather station starts
with the reception of the radio time signal. This
process can take up to 5 minutes and is indicated
in the LC display by the flashing symbol .
11
After successful reception of the DCF radio signal,
the symbol is displayed continuously in the
LC display.
Note: Do not move the weather station while it is
receiving the signal. Otherwise this could interfere
with reception.If synchronisation is not possible
when the weather station is being first set up, try
changing the location (e.g. place the weather sta-
tion near to a window).
Reception may be considerably reduced by obstruc-
tions (e.g. concrete walls) or sources of interference
(e.g. other electrical devices).
If the reception of the radio signal continues to be
interrupted, you can set the time and date manu-
ally (see "Setting the language / time zone / time /
date manually").
GB 15
96385_aur_Temperaturstation_content_PL_HU_SI_CZ_SK.indd 15 13.01.14 12:33