Pan & Tilt Adjustments - Eneo IPD-73M2812M0A Betriebsanleitung

Pan & Tilt adjustments
1. Pan limit: Pan is limited to +/- 173°. Do NOT force to rotate the gimbal over the
limit to prevent from the internal damage.
2. Tilt limit: Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when
the inclination of camera module is 0°, that is, the image is aligned horizontally.
CAUTION:
to the lens when the inclination is NOT 0°. When Tilt is set to
near the minimum limit, examine and verify that NO IR refection
occurs.
3. Inclination limit (Horizontal image alignment): Inclination limited to +/- 95° max.
CAUTION:
Extreme care should be taken NOT to scratch the bubble dome
surface while the camera installing or adjusting.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
should be NO gap between Lens hood and clear bubble to avoid
8