Accessories; Guidebar And Saw Chain Combinations - Husqvarna 525P4S Bedienungsanweisung

Equivalent vibration levels (a
Equipped with approved accessory (original), front/rear

Guidebar and saw chain combinations

Recommended guide bar and saw chain combination.
Guide bar
Length, in/cm Pitch, in
10/25
3/8
12/31
10/25
3/8
12/31
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
703 - 007 - 28.04.2021
) at handles, measured according to ISO 22867, m/s
hv,eq

Accessories

Gauge, in/mm
0.050/1.3
0.050/1.3
525P4S
3.6/3.5
Saw chain
Type
Husqvarna H37
Husqvarna S93G
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
525P5S
2
:
3.6/3.5
Length, drive links, no.
40
45
40
45
25