Atag ES1011MAM Anleitung Seite 86

USe
Alarm indicators
GB 10
Active carbon/grease filter saturation:
When the LEDs on the display turn Red this means that the filters must
be replaced or washed.
A – Anti grease filters:
When on the display the LED 1 is RED and starts flashing, it means that
the hood has been running for 30 hours and that the anti-grease filters
have to be cleaned.
In order to reset the electronic memory press the OFF button for 5
seconds until LED 1 stops flashing.
B – Active Carbon filters:
When on the display the LED 2 is RED and starts flashing, it means that
the hood has been running for 120 hours and that the active carbon
filters have to be cleaned or replaced.
In order to reset the electronic memory press the OFF button for 5
seconds until LED 2 stops flashing.
Activation of the function for the indication of inserted active
carbon filters:
By pressing simultaneously the OFF and ON buttons for 5 seconds
the active carbon filters indicator function is activated with an acoustic
indicator of the Buzzer and the switching on for 1 second of all GREEN
LEDs.
+
Deactivation of the inserted filters indicator function:
By pressing simultaneously the OFF and TIMER buttons for 5 seconds
the active carbon filters indicator function is deactivated with an
acoustic indicator of the Buzzer and the switching on for 1 second of all
RED LEDs.
=