Balluff BOS R254K-UUI-RS10-S4 Bedienungsanleitung Seite 159

BOS R254K-UUI-RS10-S4
Photoelectric Sensors
6
System Functions (continued)
Behavior IO-Link
With Behavior IO-Link, the behavior of the pins during
active IO-Link communication can be determined. The pin
can either continue to perform its function or become
inactive.
Value Name Description
Pin 4
0x00 (0) IO-Link This is the communication pin.
It cannot execute any other
function during an active
IO-Link connection.
Pin 2
0x00 (0) Inactive The pin has no function and is
high-impedance.
0x01 (1) Normal The pin retains its function.
Operation
Tab. 6-12: Pin assignment – Behavior IO-Link
Mode
The function of the pin can be selected with Mode.
Value Name Description
0x00 (0) Inactive The pin has no function and is
high-impedance.
0x01 (1) Digital The pin works as a digital
Output output.
0x02 (2) Analog The pin works as an analog
Output output.
0x03 (3) Digital Input The pin works as a digital
input.
Tab. 6-13: Pin assignment – Mode
www.balluff.com
Signal Source
With Signal Source, the internal signal source for the pin
can be selected. Various signal sources are available that
can be output or read on a pin.
Value Name
Digital Output
0x0003 (3) Switching Counter Limit not reached
0x0004 (4) Switching Counter Limit reached
0x0005 (5) Switching Counter Limit exceeded
0x0008 (8) Signal Delay Channel 1
0x0009 (9) Signal Delay Channel 2
0x000A (10) Signal Delay Channel 3
0x000B (11) Signal Delay Channel 4
0x0010 (16) Switching Speed ok
0x0011 (17) Switching Speed Too Low
0x0012 (18) Switching Speed Too High
0x0015 (21) Short Circuit Pin 4
0x0016 (22) Short Circuit Pin 2
0x0017 (23) Undervoltage
0x0018 (24) Overvoltage
0x001A (26) Cable break pin 2
0x0023 (36) Humidity Bad
0x0027 (39) Transducer Enable
0x002D (45) Optical Transmitter Error
0x002F (47) System Error
0x0037 (55) Inclination Alarm
0x0041 (65) Lifetime Extreme
0x004B (75) Vibration Alarm Status
0x0063 (99) Logic block result 1
0x0064 (100) Logic block result 2
0x0065 (101) Logic block result 3
0x0066 (102) Logic block result 4
Digital Input
0x0002 (2) Digital Input Pin 2
0x0007 (7) Switching Counter Reset
0x0014 (20) Switching Speed Reset
0x0027 (39) Transducer Enable
english 73