Ating Data; O Perating Conditions - SUHNER WB 10 Originalbetriebsanleitung

Optimize the grinding belt tension with hexagon spanner
and mount the belt grinding attachment again.
Let the tool run without load for at least thirty seconds.
2.1.3 r /
eplAcing cOnnecting the Belt grinding AttAchment
Attach the belt grinding attachment to the drive at the po-
sition you want, and tighten the screw.
2.1.4 r /
eplAcing cOnnecting the cOntAct Arm
Loosen the knurled nut. Replace the contact arm, and
retighten the knurled nut.
2.1.5 r /
eplAcing cOnnectiOn the cOntAct rOller
2.2 r

Ating dAtA

Connection
Maximum speed
Vibration EN 60745
Weight
Grinding belt and non woven:
Belt length
Belt width
Belt thickness
Belt tension
Belt speed
Drive roller
The specified vibration value was measured with a
standardised test method and may differ from the
actual operating value. The specified value can be
used for product comparisons or for an introductory as-
sessment of work breaks.
2.3 O
perAting cOnditiOns
Temperature range during operation: 0 to +50°C
Relative air humidity: 95% at +10°C not condensed
G28
-1
17'100min
2 2
2.5m/s , K=1m/s
1.200kg
520mm / 20,5"
3-13mm / 1/8"-1/2"
up to 4mm
40-90N
27m/s
Ø 30mm
23