Use - Casselin CDLPC4 Handbuch

power system data. Connect the device only when there is compliance. The unit should be unpacked and
EN
checked fully before connecting by a professional.

5.2 Use

WARNING
The establishment of the installation of the device and maintenance must be performed only by professionals.
• Do not leave the unit without monitor.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The unit must be completely removed from its packaging. All guards must be fully
withdrawn.
Place on a solid, flat surface
Never put the unit on a flammable surface.
Do not install this device near open fires or other heating appliances.
USE
Connect the equipment.
Once connected the red light comes on.
Turn the temperature control knob. The green light comes on.
The temperature may be between 40 ° and 80 ° C.
After reaching the desired temperature, the green light goes off.
As the temperature decreases, the device starts to heat up and the green LED lights up again.
NOTE
The device has a security system in case of overheating. Upon activation, disconnect the device and allow it
to cool. If this protection system will start regularly, it is imperative to contact your dealer.
After automatic shutdown, the unit may be commissioned only by pressing the reset button on the unit's back
for this, wait until the temperature drops, press the Reset button.