Brunton Restore Handbuch Seite 10

Charging with a USB cable that was supplied with your 5V electronics
unit:
1. Fully charge your BRUNTON Restore unit.
2. Unplug the Mini USB connector from the side of the unit.
3. Plug the USB cable supplied with your portable electronic device
into the USB port on the BRUNTON Restore. Plug the other end
of your cable into the electronic device needing power.
4. Wait until the electronic device is fully charged.
5. Unplug the cable from the electronic device and from the
BRUNTON Restore.
6. Reseat the mini USB connector into the port on the BRUNTON
Restore.
7. Recharge unit as necessary.
Note: if you need another adaptor to use with your BRUNTON
portable power product, please visit our website at
to purchase the adaptor you need.
10
www.brunton.com