Technical Specifications - Brock TO 4502 BK Bedienungsanleitung

GB
If you need the right hotplate works only,please turn the rotary knob to "
right hot plate will start working. After using the hot plate for cooking, please turn the hotplates control knob
to " OFF " side to shut off the hotplate heating.
If you need the oven and hotplate both work, please turn the hotplate control knob to select the hotplate. Set
the function knob to your needed heating mode and set the temperature. Finally set your timer,and the oven
starts to work.
If you need the oven works only,please keep the hotplate control knob pointed to "OFF" position.Then you may
select cooking mode by the function knob and set the temperature.Finally set your timer, and the oven starts
to work.
The oven and the hotplates stop working when the timer knob reaches "OFF" position.
Warning: Be sure to unplug the oven and cool it before cleaning.
If desired, wipe inside the oven with a damp sponge, cloth or nylon scouring pad with mild detergent. All
accessories should be washed in hot soapy water. The glass door can be wiped with a damp sponge and wiped
dry with a paper or cloth towel. Clean the outside with a damp sponge.
DO NOT USE ABRASIVE CLEANING AGENT!
INFORMATION FOR USERS FOR THE USE OF ELECTRICAL AND ELECTRONIC DEVICES
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental safe recycling.
This product meets all the basic requirements of EU directives related to it.
The owner of the trademark "BROCK Electronics" is GTCL Baltic LTD
Phone: +371 67297762
E-mail: gtcl@gtcl.eu
www.brockgroup.eu
Technical service: Tel. +371 28683856, serviss@gtcl.eu
CLEANING

TECHNICAL SPECIFICATIONS

220-240V ,~ 50/60 Hz
Power: 1800 W
Left hotplate power: 1000 W
Right hotplate power: 500 W
", and set the timer ,then the