Basic Operation; First Installation - Reflexion LDDX22I+ Bedienungsanleitung

PREPARE THE DEVICE
Check that all required cables and connections are available.
1) Install the stand foot with the included screws.
2) Connect the included power supply or car adapter to the
Connect the other side of the power pack or car adapter to the appropriate voltage
source.
3) Insert two AAA batteries into the supplied remote control.
4) Connect your satellite antenna or cable system / DVB antenna to the connection
/ of the TV set.
5) Connect all other external devices (e.g. Blu Ray player, etc.) to the appropriate
connections on the TV set.
Note:

Place the TV set on a level and stable surface.

BASIC OPERATION

Device on / off (standby)
Input source menu open / close.
Menu navigation (up / down / left / right).
Select or confirm a menu item. Open station list.
Open or close the main menu.
Menu item back.
Switch to Smart TV mode
VOL: Adjust the volume (louder / quieter).
CH: Switch programs (up / down).
Mute the sound (On / Off).

FIRST INSTALLATION

Once you have connected the device and all devices, follow the next steps to carry out the initial
installation of the device.
1. Press the toggle switch on the device so that it is on.
50
EN
input of the device.