Inhaltsverzeichnis
Werbung
GTKS 1800 Pro
residual risks
Danger of injury !
Always keep hands away from the path of the saw
blade.
In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.:
- work piece parts being thrown off,
- parts of damaged tools being thrown off,
- noise emissions,
- wood dust emissions.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to re-
place any used material in the first-aid kit immediately
after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbole
Caution!
Read the Operating Instructions
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
wear ear protectors!
wear eye protective goggles !
Always keep hands away from the path of
the saw blade.
Protect against humidity
Never expose tool to rain.
Protect against humidity
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
This side up
General Power Tool Safety Warnings
WarnInG
read all safety warnings and all instructions. Failu-
re to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while ope-
rating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radia tors, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords incre-
ase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp loca tion is
unavoidable, use a residual current device (RCD)
protected supply. use of an RCD reduces the risk
of electric shock.
EnGLISH
23
Werbung
Inhaltsverzeichnis
