Electrical Connection; Things To Be Done For Energy Saving; Initial Use; Correct Load Capacity - Beko WMY 81443LMB2 Bedienungsanleitung

A
WArnIng:
Do not use any tools to loosen the lock
nuts. Otherwise, they will get damaged.

2.7 Electrical connection

Connect the product to a grounded outlet protected by a 16
A fuse. Our company shall not be liable for any damages
that will arise when the product is used without grounding in
accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after
installation.
• If the current value of the fuse or breaker in the house is
less than 16 Amps, have a qualified electrician install a
16 Amp fuse.
• The voltage specified in the "Technical specifications"
section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-
plugs.
B
WArnIng:
Damaged power cables must be
replaced by the Authorized Service Agents.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product.
4. Install transportation safety bolts in the reverse order of
removal procedure;
C
Never move the product without the transportation
safety bolts properly fixed in place!
A
WArnIng:
Packaging materials are dangerous to
children. Keep packaging materials in a safe place
away from reach of the children.
3 Preparation
3.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and
degree of soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.
3.2 Preparing laundry for washing
• Laundry items with metal attachments such as,
underwired bras, belt buckles or metal buttons will
damage the machine. Remove the metal pieces or wash
the clothes by putting them in a laundry bag or pillow
case.
• Take out all substances in the pockets such as coins,
pens and paper clips, and turn pockets inside out and
brush. Such objects may damage the product or cause
noise problem.
• Put small size clothes such as infant's socks and nylon
stockings in a laundry bag or pillow case.
• Place curtains in without compressing them. Remove
curtain attachment items.
• Fasten zippers, sew loose buttons and mend rips and
tears.
• Wash "machine washable" or "hand washable" labeled
products only with an appropriate programme.
• Do not wash colours and whites together. New, dark
coloured cottons release a lot of dye. Wash them
separately.
29 / EN
All manuals and user guides at all-guides.com
• Tough stains must be treated properly before washing. If
• Use only dyes/colour changers and limescale removers
• Wash trousers and delicate laundry turned inside out.
• Keep laundry items made of Angora wool in the freezer
• Laundry that are subjected to materials such as flour,

3.3 Things to be done for energy saving

Following information will help you use the product in an
ecological and energy-efficient manner.
• Operate the product in the highest capacity allowed by
• Always follow the instructions on the detergent
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small quantities of lightly
• Do not use prewash and high temperatures for laundry
• If you plan to dry your laundry in a dryer, select the
• Do not use detergent in excess of the amount

3.4 Initial use

Before starting to use the product, make sure that all
preparations are made in accordance with the instructions in
sections "Important safety instructions" and "Installation".
To prepare the product for washing laundry, perform first
operation in Drum Cleaning programme. If your product
is not equipped with Drum Cleaning programme, perform
the Initial Use procedure in accordance with the methods
described under "5.2 Cleaning the loading door and the
drum" section of the user manual.
C

3.5 Correct load capacity

The maximum load capacity depends on the type of laundry,
the degree of soiling and the washing programme desired.
The machine automatically adjusts the amount of water
according to the weight of the loaded laundry.
unsure, check with a dry cleaner.
suitable for machine wash. Always follow the instructions
on the package.
for a few hours before washing. This will reduce pilling.
lime dust, milk powder, etc. intensely must be shaken off
before placing into the machine. Such dusts and powders
on the laundry may build up on the inner parts of the
machine in time and can cause damage.
the programme you have selected, but do not overload;
see, "Programme and consumption table".
packaging.
soiled laundry.
that is not heavily soiled or stained.
highest spin speed recommended during washing
process.
recommended on the detergent package.
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to
the quality control processes in the production. It is not
harmful for the product.
Washing Machine / User's Manual