Product Overview; Operation; Before Operation; Before Operation Safety - Toro SnowMax 724 ZXR Bedienungsanleitung

Product Overview

1. Auger lever
2. Fuel tank cap
3. Dipstick
4. Skid
5. Auger
6. Scraper
1. Fuel tank cap
2. Primer
3. Ignition key
Figure 8
7. Discharge chute
8. Chute deflector
9. Chute deflector control
10. Discharge chute control
11. Upper handle
Figure 9
4. Choke
5. Recoil starter

Operation

Before Operation

Before Operation Safety

•
For electric-start models only: Use extension
cords and receptacles as specified in the manual.
Thoroughly inspect the electrical cord before
plugging it into a power source. If the cord is
damaged, do not use it. Replace the damaged
cord. Unplug the power cord whenever you are
not starting the machine.
•
Wear adequate winter garments whenever
you operate the machine. Wear substantial,
slip-resistant footwear that improves footing on
slippery surfaces. Avoid loose-fitting clothing that
can get caught in moving parts.
•
Always wear eye protection during operation or
while performing an adjustment or repair to protect
your eyes from foreign objects that the machine
may throw.
g030450
•
Thoroughly inspect the area where you will use the
machine, and remove all doormats, sleds, boards,
wires, and other foreign objects.
•
If a shield, safety device, or decal is damaged,
illegible, or missing, repair or replace it before
beginning operation. Also, tighten any loose
fasteners.
DANGER
Fuel is extremely flammable and explosive. A
fire or explosion from fuel can burn you and
others.
• To prevent a static charge from igniting the
fuel, place the container and/or machine on
the ground before filling, not in a vehicle
or on an object.
• Fill the tank outdoors when the engine is
cold. Wipe up spills.
• Do not handle fuel when smoking or
around an open flame or sparks.
• Store fuel in an approved fuel container,
g030451
out of the reach of children.
• Do not tip the machine either forward
or backward with fuel in the fuel tank;
otherwise, fuel may leak out of the
machine.
6