Accessories; Maintenance; General Conditions Of Sales And Delivery - oventrop Regudis W-HTF Betriebsanleitung

7.6 Settings differential pressure regulator
When leaving the factory, the differential pressure re-
gulator is set to 150 mbar. The setting should not be
changed. Lower settings provoke a reduction of the
draw off capacity; higher settings can lead to noises
in the heating circuit.
Illustr. 7.5 System illustration

8 Accessories

Ball valve connection set:
Ball valve connection set
high temperature circuit:
Cabinet:
Cabinet "long model":
Surface-mounted cabinet:
Surface-mounted cabinet (long model):
Derivative temperature control set:
Connection set stainless steel
distributor/collector:
Plug for temperature sensor
(heat meter):
Electric sensor attached to the pipe:
(With hidden temperature setting control range 20-90 °C)
The complete range of accessories can be found in
the catalogue or
www.oventrop.com.
26
1341180
1341183
1341170
1341175
1341071
1341198
1341190
1341187
1349054
1143000
on the internet under

9 Maintenance

To guarantee a perfect operation of the dwelling
station, it is recommended to have it maintained by a
specialist heating company at least once a year.
The following work should be done:
– Leakage test:
– Test opening of the PM controller (illustr. 5.1)
– of all valves and fittings.
– Cleaning of strainers (illustr. 7.1).
– Functional control:
– Check closing function of the PM controller: The
heat exchanger has to cool down after drawing
off.
– Check isolating valves.
– Check flow and draw off temperature.
10 General conditions of sales
and delivery
Oventrops general conditions of sales and delivery
valid at the time of supply are applicable.