Safety; What You Should Pay Attention To; During Use - Pelgrim MSL620ERVS Anleitung

SAFETY

What you should pay attention to

For safety tips in relation
to the installation, we refer
you to the instructions
in the accompanying
installation guide.

During use

This extractor hood is extremely safe. There are, however, a number of
things you have to pay attention to, just as for any other product.
This appliance should only be connected by a registered installer.
Repairs should only be carried out by an authorised service engineer.
Never open the casing and do not alter the mechanical and/or electrical
structure of the appliance. This could result in dangerous situations
(touching live components) and faults.
Do not use the appliance if it is damaged.
The appliance should be disconnected from the mains before being
repaired or cleaned. Remove the plug from the socket or turn the
switch in the meter cupboard to zero.
For electrical safety reasons, the appliance must not be cleaned using
high-pressure cleaners or steam cleaners.
Flambéing under an extractor hood is not permitted. The high flames
could cause a fire.
Always keep an eye on things when deep-frying.
Switch the extractor hood on before starting to cook. Leave the
extractor hood on for about ten minutes after you have finished
cooking.
Clean the extractor hood regularly, as specified on page 7,
"maintenance". In this way, you prevent the risk of fire.
Disconnect the extractor hood from the mains before replacing the light
bulbs! Only use the same light bulbs, with the wattage stated at the
inside of the hood.
GB 5