AEG L 87485 FL Benutzerinformation Seite 9

The phase symbols
• When a programme is set, all the symbols of the phases related to
the programme come on.
• When the programme starts, only the symbol of the phase in opera-
tion flashes.
• When the programme is completed, the symbol of the last phase is
on.
D
E
F
G
H
I
Graphic bars
If you make a wrong selection the message Err indicates that the selection
is not possible.
The steam symbol comes on when you set a Steam pro-
gramme.
The detergent overdosing comes on at the end of the cycle
when the appliance detects too much detergent.
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• The 'Rinse Hold' function is on.
• There is water in the drum.
The delay start symbol comes on when you set the delay
start function.
• The programme time
When the programme starts, the programme time decrea-
ses with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows
the delay start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm
codes. Refer to 'Troubleshooting'.
• The display shows this message for some seconds when:
– You set a function that is not applicable for the pro-
gramme.
– You change the programme while it operates.
• When the programme is completed.
The child safety lock symbol comes on when this device is
activated.
The empty indicator bar appears only if the related function
is available for the set programme.
The indicator bar fills accordingly to the set functions.
ENGLISH 9