Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Focusing / Autofocus
Please note that objects with very low contrast (like blank sheets of paper) are difficult to focus. If the
autofocus does not work just move the object slightly.
For special applications the autofocus can also be switched off using the on/off switch (#30 or #46). The
autofocus is also switched off when the manual FOCUS keys (#31 or #45) are used.
Optical Zoom / Digital Zoom
Please note that the Visualizer has an optical 14x zoom. The digital 2x zoom increases the overall zoom
range to a 28x zoom. The smallest pickup size on the working surface without digital zoom is 29 x 22mm
(1.1" x 0.9"). When you zoom in further the digital zoom is automatically activated and the smallest pickup
size is 15 x 11mm (0.6" x 0.4"). However please be aware that when the digital zoom is used, the resolution
of the picture is not as good as before. The default setting displays a message on-screen when you are in
the digital zoom mode.
Image ratio is affecting the size of pick-up are, it depends on selected output resolution.
You can change the behavior of the Visualizer in the digital zoom mode in the on-screen menu (see
p
age 16).
Auto Exposure
WolfVision Visualizers are equipped with an auto exposure. This means that the brightness of the camera
image adjusts automatically. Using the EXPOSURE keys (#41) the image brightness gets darker or
brighter.
The standard auto exposure level (Image Brightness) can also be set brighter or darker in the unit's on-
screen menu. When picking up areas with bright spots, Back Light Compensation can be switched on in the
unit's on-screen menu - see page 16 and on-screen help.
Preset Function
The Visualizer offers the possibility to store the current settings as a Preset and recall them by just pressing
the respective PRESET key (#27) on the remote control.
Preset 1 can be controlled with the PRESET key on the camera head (#43).
For storing a reset adjust
p
:
seconds
or more
. An on-screen message
As mentioned above, when presets are stored all current settings such as zoom, focus, iris etc. are also
stored. Contrary to this, a user also has the opportunity to assign specific functions such as: "POS/NEG",
"NEG/BLUE", "BLACK/WHITE", "WHITE BALANCE", "FREEZE", "LIGHT ON/OFF" etc. to a PRESET key
in the on-screen menu of the Visualizer (see page 16).
an
y function as required and then
will
inform you when the Preset is stored.
press any one of the
9
PRESET key for 2
s
Werbung
Inhaltsverzeichnis
