The Dishwashing Results Are Not Satisfactory - hanseatic WQP8-7736B Gebrauchsanleitung

Page EN-30 Troubleshooting table

The dishwashing results are not satisfactory

Problem Possible cause
There are resi- The rinse aid is incorrectly dosed.
dues or streaks
on the dishes.
There is no dishwasher salt.
The dishwasher salt is clumpy.
The dishes are There are food scraps which are en-
not completely crusted onto the dishes.
clean.
The dishes have not been stacked
optimally.
You have selected the incorrect dish-
washing programme.
The dishwasher detergent is incor-
rectly dosed.
The water pressure is too low.
The spraying arm can not rotate un-
hindered.
The nozzles on the spraying arm are
blocked/calcified.
Solution
Adjust the dispensed dose (see „Add-
ing rinse aid" on page EN-11).
Add dishwasher salt (see „Adding
dishwasher salt" on page EN-12).
Stir the dishwasher salt using the end
of a spoon or similar.
Soak dirty dishes prior to washing the
dishes.
Stack the dishes in such a way that
all parts can be reached by the water
jets (see „Loading the dishwasher" on
page EN-13).
Select the correct dishwashing pro-
gramme (see „Dishwasher pro-
gramme table" on page EN-16).
Use the correct dosage of dishwash-
er detergent (see „Dishwasher pro-
gramme table" on page EN-16).
Turn the water tap on completely.
Ensure that no dishes are impeding
the motion of the spraying arm.
Clean the nozzles (see „Cleaning the
spraying arm" on page EN-21).