AEG SANTO D 4 12 40-6 i Gebrauchs- Und Einbauanweisung Seite 33

Remove the brackets and mark a
distance of 8 mm from the outer
edge of the door where the nail
must be fitted (K).
Place the small square on the guide
again and fix it with the screws sup-
plied.
Should the lining up of the furnitu-
re door be necessary, use the clea-
rance of slots.
At the end of operations, it is neces-
sary to check if the door of the fur-
niture closes properly.
Fix cover (Hd) on guide (Hb) until it
clips into place.
8mm
K
Hb
PR168
Hb
Hd
PR167/1
Ha
33