Listening To Fm Radio - Teac CR-H101DAB Bedienungsanleitung

FM mode
Press the MODE button to switch between stereo and mono reception.
Display
FM mode
example
FM
107.90MHz
Frequency range
STEREO
Receive stereo FM broadcasts in stereo.
o "STEREO" will be shown when receiving in stereo.
MONO
Receive FM broadcasts in mono. When the reception of an FM stereo
broadcast is poor, select this mode. The sound becomes mono, but noise is
also reduced, making it sound better.
Changing the received frequency
Increasing the received frequency
Press the direction (;) button to increase the received frequency one step.
Press and hold the direction (;) button to search for a station in the
higher-frequency direction.
Decreasing the received frequency
Press the direction (l) button to decrease the received frequency one step.
Press and hold the direction (l) button to search for a station in the
lower-frequency direction.
Setting presets automatically
The unit can automatically search for stations that it can receive and assign
them to preset numbers.
Press and hold the PROGRAM button.
The unit will search for stations from the lowest receivable frequency to the
highest and assign them to preset numbers.
o After 20 presets have been assigned, "Full" will blink on the display and
automatic preset assignment will stop.
Selecting presets
Use the direction (k/j) buttons to change the preset number.
Display
FM
example
P03 87.5MHz
Preset number

Listening to FM radio

STEREO
19