3: Connecting An Aerial/Vcr - Sony BRAVIA KDL-W40A11E Bedienungsanleitung

3: Connecting an aerial/VCR

3
Mains lead
(supplied)
VCR
1
Connect your aerial to the
rear of the TV.
If connecting to an aerial only
Go to step 3.
2
Connect your VCR.
1 Connect the socket on the rear of the TV to
the input socket on your VCR with the RF
lead.
2 Connect the scart socket on your VCR to the
/ 2 scart socket on the rear of the TV
with a scart lead.
3
Connect the supplied mains lead to the AC
IN socket on the rear of the TV.
Note
Do not connect the mains lead to your mains socket until
all connections are complete.
Rear of the TV
(SMART LINK)
1 2 3
Scart lead (not supplied)
IN
OUT
4
socket on the
1
Coaxial cable
(supplied)
2-
2
Bundle the cable.
1 Run the mains lead through the bundling band
and attach to the right of the rear panel with
the supplied screw.
2 Remove the screw to open one side of the
cable cover and run the cables through, then
tighten the screw again.
2-
1
RF lead
(not supplied)
11
GB