Handling; Storage; Installation, Environmental Conditions And Electrical Connection - Tefcold MD-Serie Bedienungsanleitung

12. HANDLING

13. STORAGE

Store the CABINET indoors with temperatures between -25°C and 55°C with relative humidity between 30% and
90%. It is forbidden to store the appliance in uncovered areas subject to atmospheric agents and under direct sunlight.
Ultraviolet rays can cause discoloration and / or permanent deformation of some components of
the CABINET. The manufacturer is not responsible for such defects when caused by storage
other than as described above
14. INSTALLATION, ENVIRONMENTAL CONDITIONS AND ELECTRICAL
CONNECTION
The appliance is powered by electricity, pay attention at the time of connection that the line is
suitable and in accordance with the legislation of the country of installation
The packaging is also composed of nails and metal parts that can cause injuries and injuries. Take
great care and use the appropriate PPE.
For appliances equipped with glass doors, remove the door opening retaining devices last, as
accidental openings may result in impact and/or injury.
Installation operations are reserved for qualified operators. The preparation of the installation area
and the verification of the qualification of the operator is not the responsibility of the manufacturer.
The environmental conditions of the installation area must be those provided for the correct
operation of the appliance, that is, they must not exceed those of climate class 3 of ISO 23953
(25 ° C / 60% RH) and at a temperature NOT lower than 16 ° C
The power supply line must be equipped with a disconnector with automatic protection against short
circuits, overloads, discharges to the ground and differences between the line and the furniture.
Lighting in the installation area must comply with the regulations in force in the country of
installation
Sufficient space must be kept between the side, rear, and upper walls for proper ventilation, use and
maintenance (FIG.8)
The CABINET must not be moved when loaded with goods. The cabinet must be empty during
handling
The CABINET must not be placed in areas subject to drafts, heat sources or direct sunlight
The equipment must not be installed in environments with a high explosive risk
Attention, risk of crushing due to heavy load. Personal protective equipment such
as safety shoes and anti-cutting gloves must be worn when handling the appliance.
The personnel involved in transport and handling must be qualified, able to verify
weights, gripping points, load stability and usage tools suitable for the purpose that
are not damaged, or worn and compliant with current regulations. During the
transport phase it is mandatory to ensure that unauthorized persons are not present
in the pick-up, unloading and movement area.
It is forbidden to drag and / or pull the CABINET using the doors (if any) or
shelves as a foothold.
.
10