Fagor 6H-880A Bedienungsanleitung Seite 22

2.8 Button sound adjustment. Select Settings and
validate (2.5.1, 2.5.2). Select Sound and validate
(2.8.1). Select the Bip on or Bip off option.
Validate (2.8.2).
2.9 Display contrast adjustment. Select Settings
and validate (2.5.1, 2.5.2). Select Display and
validate (2.9.1). Adjust the contrast and validate
(2.9.2).
There are two display modes: Permanent (On)
(the display remains constantly on) and Holding
(the display goes dark after a certain time to save
energy). Select the desired mode and validate
(2.9.3). To activate a display in wait mode, press
.
2.10 Interior oven light function: When the oven is in
power saving mode, the light only comes on for
a few seconds, when you press
deactivate this function so that the light remains
permanently on during cooking if you wish. To do
this, with the oven switched off, press the
buttons simultaneously and hold them down
until you hear a beep. To return to power saving
mode, repeat the operation.
2.11 Celeris Function. This function is for quickly
reaching the desired temperature. It is
recommended for dishes that require pre-heating.
A series of beeps will sound when the temperature
is reached. Select Settings and validate (2.5.1,
2.5.2). Select Celeris and validate (2.11.1).
Activate or deactivate the function and validate
(2.11.2).
2.12 Electricity consumption adjustment. This
function allows you to check the oven's electricity
consumption. With an "economy hours" contract
you can consult the details of consumption at
these times. Select Settings and validate (2.5.1,
2.5.2). Select Consumption and validate (2.12.1).
The consumption data display will appear. Validate
(2.12.2). Use ,
time for the economy bands. When you have
changed all the desired parameters, press
validate (2.12.3).
Note: If you have entered the economy band
times in the pyrolysis function, the oven will
suggest starting the cleaning process at the
nearest available time. If you wish to start pyrolysis
immediately, you will need to cancel the economy
band time programming.
2.13 Fagor Services. This option enables you to obtain
the contact details for the customer service and
after-sales departments. Select Settings and
validate (2.5.1, 2.5.2). Select Info and validate
20
All manuals and user guides at all-guides.com
. You can
and
to adjust the start and end
to
(2.13.1). You will access the information display. To
exit, press (2.13.2).
2.14 Child lock. This is used to prevent children from
playing with the oven control buttons. With the
oven switched off, press and hold down
the key appears (2.14.1). When any button is
pressed, the keypad locked display appears. To
unlock it, select unlock and validate (2.14.2).
COOKING
2.15 Instant cooking. Select Cookfunctions on the
menu and validate (2.15.1). Press
select the desired cooking function, and validate
(2.15.2).
Defrost. Rapidly thaws any kind of food.
Traditional heat. For bread, cakes, cakes with
fi lling and lean meat.
High base heat. The heat from the oven base is
evenly distributed. Ideal for paellas or pizzas.
Low grill. For hamburgers, toast and food with a
small surface area.
High grill. For browning pasta, souffl és and
bechamel sauce.
Fanned high grill. This browns the food,
distributing the heat evenly. Ideal for large-sized
roasts.
Turbo plus. The heat is produced by the central
element.
Traditional fanned heat. For any kind of dish.
Several dishes may be cooked at once without
their fl avours or smells mixing.
Delicate foods. For yoghurt or dried foods (dried
mushrooms, for example).
3D heat. This enables you to cook several trays of
food at the same time.
4-level grill. The browning time is longer than with
a standard grill.
Keep warm function. This keeps already-cooked
food warm.
After validating the cooking function, you may
change the suggested temperature by pressing
, . Press to validate (2.15.3). Press
again for cooking to start (2.15.4). You may
change the temperature by pressing
You may switch off the oven by pressing
(2.15.6).
Time functions
Setting the time. After selecting the cooking
function, you may also change the time functions.
Select and enter the cooking duration (2.15.7).
When the selected time has elapsed, the oven will
switch off and a beep will sound. To stop the beep,
press .
Setting the end of cooking time. Select
e n g l i s h
until
, to
(2.15.5).
on