General Description; Front Panel - Shure ULX-D Bedienungsanleitung

General Description

Shure ULX-D Digital Wireless offers uncompromising audio quality and RF performance, with intelligent, encryption-enabled hardware and advanced rechargeability options for
professional sound reinforcement.
A breakthrough in wireless audio quality, Shure digital processing enables ULX-D to deliver the purest reproduction of source material ever available in a wireless system. Extended
20 Hz – 20 KHz frequency range and totally flat response captures every detail with clarity, presence, and incredibly accurate low-end and transient response. At greater than 120
dB, ULX-D delivers wide dynamic range for excellent signal-to-noise performance. For added convenience, proprietary Shure Gain Ranging optimizes the system's dynamic range
for any input source, eliminating the need for transmitter gain adjustments.
In RF performance, ULX-D sets the bar for wireless channel efficiency and signal stability. Minimized intermodulation allows more transmitters to operate simultaneously over one
TV channel than any other system. Rock-solid RF signal with no audio artifacts extends over the entire 100 meter line-of-sight range, even using standard dipole antennas. For
applications where secure transmission is required, ULX-D offers Advanced Encryption Standard (AES) 256-bit encrypted signal for unbreachable privacy.
Advanced Lithium-ion rechargeability provides extended transmitter battery life over alkaline batteries, battery life metering in hours and minutes accurate to within 15 minutes, and
detailed tracking of battery health status.
Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.
Full Manual Online
This is the quick-reference version of the user guide.
For information on the following topics, visit www.shure.com to download the comprehensive manual:
• High Density Mode
• Encryption
• Multiple systems setup
• RF and hardware presets
Receiver

Front Panel

① Sync Button
Press the sync button while the receiver and transmitter IR windows are
aligned to transfer settings from the receiver to the transmitter
② Infrared (IR) Sync Window
Sends IR signal to the transmitter for sync
③ Network Icon
Illuminates when the receiver is connected with other Shure devices on
the network. IP Address must be valid to enable networked control
④ Encryption Icon
Illuminates when AES-256 encryption is activated: Utilities >
Encryption
⑤ LCD Panel
Displays settings and parameters
⑥ Scan Button
Press to find the best channel or group
⑦ Menu Navigation Buttons
Use to select and navigate through parameter menus
⑧ Control Wheel
Push to select menu items for editing, turn to edit a parameter value
⑨ RF Diversity LEDs
Indicate antenna status:
- Blue = normal RF signal between the receiver and transmitter
- Red = interference detected
- Off = No RF connection between the receiver and transmitter
Note: the receiver will not output audio unless one blue LED is illuminated
All manuals and user guides at all-guides.com
• Warning Messages
• Networking details
• Firmware updates
• AMX and Crestron connections
ULXD4
Digital Wireless Receiver
⑩ RF Signal Strength LEDs
⑪ Audio LEDs
⑫ Gain Buttons
⑬ Power Switch
• Troubleshooting
• Product specifications and wiring diagrams
• Compatible frequencies chart
IR
3 4 5
1 2
Indicate the RF signal strength from the transmitter:
- Amber = Normal (-90 to -70 dBm)
- Red = Overload (greater than -25 dBm)
Indicate average and peak audio levels:
LED Audio Signal Level
Red (6) -0.1 dBFS
Yellow (5) -6 dBFS
Yellow (4) -12 dBFS
Green (3) -20 dBFS
Green (2) -30 dBFS
Green (1) -40 dBFS
Adjust channel gain
Powers the unit on or off
7
8
9
control audio gain power
RF
A B
OL
ENTER OL
EXIT
SCAN
push
12
6 10 11
Description
Overload/ limiter
Normal peaks
Signal Present
13
9