2.10.2. Assembly and change of the nozzle
1. Assembly:Select one befitting nozzle and insert it into the
outlet's steel pipe. Press it with hand until the nozzle has
been locked. It can be used after the nozzle has been fixed
reliably.
2. Change: Take the handle down from the holder after the
nozzle has cool down. There is a slot between the nozzle and
the outlet's steel pipe. By the slot, put the handle on the
disassembly plate of the nozzle that is fixed at the holder.
After that, fix the holder with one hand and pull out the
nozzle. Change another nozzle.
NOTE: The nozzle can be ordered by the custom.
CAUTION: Change the nozzle after it has cool down.
NOTE: After 500°high temperature aging,it will have slight yellowing
phenomenon, this phenomenon is normal, please be assured use!
14
USER MANUAL