Folding the Handle
WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
1.
Hold the handle while disengaging the handle locks to avoid pinching your hands.
2.
Disengage the handle locks until you can move the upper handle freely (A of
3.
Fold the handle forward to the fully forward position (B of
Important:
Route the cables to the outside of the handle locks as you fold the handle.
4.
To unfold the handle, refer to
Figure 17
1 Assembling and Unfolding the Handle (page
17
Figure
Figure
17).
4).
17)
g334367