Bresser ClimaTrend Hygro Quadro Bedienungsanleitung Seite 14

/- button to adjust the desired lower
humidity limit.
(8) Press and hold the ALARM / SET button
after setting the value when still flashing
to activate the alarm function.
(9) The alarm symbol (A10) appears on the
display.
(10) Save the setting with the ALARM / SET
button.
DISPLAY OF ADJUSTED ALARM VALUES
1. Press the ALARM /SET button in normal
mode to show the adjusted upper alarm
limits
2. Press again the ALARM / SET button in
normal mode to show the adjusted lower
alarm limits
3. Press again this button to return to normal
display
14
DEACTIVATING /ACTIVATING THE ALARM
(1) Press the CHANNEL / + button
until the arrow appears on the desired
channel.
(2) Press and hold ALARM / SET button for 3
seconds.
(3) Upper Temperature Alert limit starts flash-
ing on the display
(4) In Temperature and Humidity Alarm Mode,
each press of ALARM / SET button rotates
between:
• Upper Temperature Alert
• Lower Temperature Alert
• Upper Humidity Alert
• Lower Humidity Alert
(5) When the above alerts are displayed,
pressing ALARM/SET button for 3 sec-
onds will deactivate/activate the corre-
sponding alert.