Battery Safety Precautions; To Set The Alarm - Denver RETRO FLIP CLOCK RADIO Bedienungsanleitung

Warning: Before using the unit. Check that the local mains supply is compatible with the
unit. Do not plug or unplug the power cord when your hands are wet.
If you do not use the unit for a long period of time (i.e. Vacation etc.), disconnect the plug
from the wall outlet.

BATTERY SAFETY PRECAUTIONS:

• Keep the batteries away from children and pets.
• Insert the batteries observing the proper polarity (+/-). Failure to properly align the battery
polarity can cause personal injury and/or property damage.
• Remove old or depleted batteries from the product. Remove the batteries when the
product is not used for extended periods of time to prevent damage due to rust or
corrosion of batteries.
• Never throw batteries into a fire. Do not expose batteries to fire or other heat sources
• Battery Disposal: Old or depleted batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local solid
waste authority.
• Follow the battery manufacturer's safety, usage, and disposal instructions.
TO SET THE TIME
Rotate the TIME SET KNOB in the direction indicated by the arrow to flip the minute and
hour digits, when the minute digit reaches 59 then the hour will increase automatically.
Note: Both time and alarm are displayed in 12 hours mode.

TO SET THE ALARM

Rotate the ALARM SET KNOB in the direction indicated by the arrow (clockwise) to select
an alarm time. Please do not rotate the alarm set knob anticlockwise as this can damage
the mechanism and prevent the clock and alarm from working properly. The alarm set dial
shows the hours on the left and the minutes in 15 minutes intervals on the right in the cycle
of 00, 15, 30 and 45.
Switch the ALARM OFF/ON switch to ON to set the alarm and to switch it off when it is
sounding. Use the ALARM select switch to choose buzzer or radio for the alarm.
TO TURN ON/OFF THE CLOCK BACKLIGHT
In normal mode, press and hold the SNOOZE button for 3 seconds to turn on/off the clock
backlight.
It will be off automatically after several seconds.
TO LISTEN TO THE RADIO
1. Press the POWER button to turn on the unit. When the radio is ON, the power LED
indicator will be lit solid red.
2. Press and hold the TUN + or TUN - button to scan the radio station and store it
automatically.
3. Press the TUN + or TUN – button repeatedly to select the radio station stored as step 2.
4. Press the POWER button again to turn off the unit.
ENG-5