Aquasafe; Electrical Connection - Beko BDSA250K3SN Gebrauchsanweisung

Installation

Aquasafe+

(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug the
product and call the Authorised Service
Agent.
A As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
Diswashers door must be
A
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
Electr cal connect on
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications"
table. Our company shall not be liable for
any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
Dishwasher / User's Manual
Connection must comply with national
•
regulations.
Power cable plug must be within easy
•
reach after installation.
B
Unplug the product after the
washing programme is over.
The voltage and allowed fuse or
•
breaker protection are specified in
the "Technical specifications" section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.
The specified voltage must be equal to
•
your mains voltage.
Do not make connections via
•
extension cables or multi-plugs.
B Damaged power cables must
be replaced by the Authorised
Service Agent.
B If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in
case of failures that may occur
on the lamp.
B If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!
11 / 45 EN