Bright 019413 Bedienungsanleitung Seite 25

CRANK
1. Pull out the crank.
2. Crank clockwise or anticlockwise for 3 to 5 minutes to
activate the internal battery before using for the first time,
or if the product has not been used for 60 days or more. The
red status light goes on during cranking.
3. To recharge, crank for 1 minute with at least 130 turns/
minute for 15 to 20 minutes of continuous light with 3 LEDs,
15 to 20 minutes of continuous radio with medium high
volume, or 3 to 5 minutes of talk time.
FIG. 5
CHARGING WITH USB PORT
1. Lift the rubber cap on the side of the product.
2. Connect one end of the charger cable to the micro USB
port on the product and the other end to a USN port on a
computer. The red status lamp goes on when the battery is
charging.
CHARGING MOBILE PHONE, PDA, MP3 PLAYER
ETC.
1. Lift the rubber cap on the side of the product.
2. Connect one end of the charger cable to the standard USB
port on the product and the other end to the external device
to be charged.
FIG. 6
EN
25