Brandson Equipment 303370/ 20180912NB053 Bedienungsanleitung Seite 27

All manuals and user guides at all-guides.com
Error
The vacuum cleaner
is not vacuuming
properly.
Dust is coming out of
the vacuum cleaner.
The vacuum cleaner
does not work proper-
ly when the accesso-
ries are attached.
The surface is still very
wet after vacuuming
the fluid.
Fluid is coming out of
the vacuum cleaner.
22
Solution
• The dust collector has to be properly installed.
Otherwise the vacuuming capacity is severely
restricted.
• The dust collector is full. Empty the dust collector.
• The filter unit is clogged. Clean the filter of the
vacuum cleaner.
• The dust collector has to be properly installed.
Otherwise the dust collector is not sealed properly
and dust may come out.
• The dust collector is full. Empty the dust collector.
• Check whether the filter and the filter unit are
properly installed.
• The dust collector is full. Empty the dust collector.
• The relevant accessory is clogged, clean it.
• Check whether the filter and the filter unit are
properly installed.
• Ensure that the fluid attachment is fixed to the
vacuum cleaner.
• Hold the vacuum cleaner at an angle of about 30°
facing downwards properly onto the surface to be
vacuumed. Never tilt the appliance to one side and
ensure that the fluid attachment is touching the
surface.
• The filter unit is wet. Ensure that the filter unit is
dry before inserting the filter into the dust collector.
• Check whether the filter and the filter unit are
properly installed.
• Never exceed the maximum level marking for
liquids in the dust collector.
English