Recording Configuration; Media Browser Menu; Followme Tv (If Available); Cec And Cec Rc Passthrough - CONTINENTAL EDISON CELED55S18B3 Bedienungsanleitung

Recording Configuration

Select the Recording Settings item in the Media
Browser>Settings menu to configure the recording settings.
Format Disk: You can use the Format Disk feature for
formatting the connected USB disk. Your PIN is required
to use the Format Disk feature.
Note: Default PIN can be set to 0000 or 1234. If you have defined
the PIN(is requested depending on the country selection) during
the First Time Installation use the PIN that you have defined.
IMPORTANT: Formatting your USB drive will erase ALL
the data on it and it's file system will be converted to
FAT32. In most cases operation errors will be fixed after
a format but you will lose ALL your data.
If "USB disk writing speed too slow to record" message
is displayed on the screen while starting a recording, try
restarting the recording. If you still get the same error, it
is possible that your USB disk does not meet the speed
requirements. Try connecting another USB disk.

Media Browser Menu

You can play photo, music and movie files stored on a
USB disk by connecting it to your TV. Connect a USB disk
to one of the USB inputs located on the side of the TV.
Pressing the Menu button while in the Media Browser
mode will access the Picture, Sound and Settings menu
options. Pressing the Menu button again will exit from this
screen. You can set your Media Browser preferences
by using the Settings menu.
Loop/Shuffle Mode Operation
Start playback with the Play
button and activate
Start playback with the OK
button and activate
Start playback with the Play
button and activate
Start playback with the Play
button and activate ,

FollowMe TV (if available)

With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe TV
feature. Install the appropriate Smart Center application
to your mobile device. Start the application.
For further information on using this feature refer to the
instructions of the application you use.
Note: This application may not be compatible with all mobile
devices. Both of the devices must be connected to the same
network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled devices,
that are connected through HDMI ports by using the
remote control of the TV.
The CEC option in the System>Settings>More menu
should be set as Enabled at first. Press the Source
button and select the HDMI input of the connected CEC
All files in the list will be continuously
played in original order
The same file will be played
continuously (repeat)
All files in the list will be played
once in random order
All files in the list will be continuously
played in the same random order.
English - 38 -
device from the Sources List menu. When new CEC
source device is connected, it will be listed in source
menu with its own name instead of the connected HDMI
ports name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
To terminate this operation and control the TV via the
remote again, press Quick Menu button on the remote,
highlight the CEC RC Passthrough and set as Off by
pressing Left or Right button. This feature can also be
enabled or disabled under the System>Settings>More
menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system (A/V
receiver or speaker system).
When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio from
connected audio device only (same as other optical or
co-axial digital audio outputs). If you want to change
connected device's volume level, you should select that
device from the source list. In that case volume control
keys are directed to connected audio device.
Note: ARC is supported only via the HDMI1 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with the
TV. The volume can be controlled using the remote
control of the TV. To activate this feature set the
Speakers option in the System>Settings>More menu
as Amplifier. The TV speakers will be muted and the
sound of the watched source will be provided from the
connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.

E-Manual (if available)

You can find instructions for your TV's features in the
E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen or press Quick Menu
button, select Information Booklet and press OK.
By using the directional buttons select a desired category.
Every category includes different topics. Select a topic
and press OK to read instructions.
To close the E-Manual screen press the Exit or Menu
button.
Note: The contents of the E-Manual may vary according to
the model.