VINCENT SV-228 Bedienungsanleitung Seite 38

CONNECTION OF A RECORDING DEVICE
If you want, you can use the RCA sockets "REC OUT" (15) on the back of the appliance to connect an
analogue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that is
intended for receiving the unchanged, fixed stereo output level (line level) from the signal source selected
on the amplifier at any given time. The output level is independent from the volume setting but reacts to
the "MUTE" command. The output level is independent from the volume setting, the Loudness function,
the tone settings (BASS, TREBLE, TONE), the position of the speaker switch (4) and the plugging-in of
the headphones (10).
RCA connection
e.g. tape recorder
LINE IN
Connect this signal output to the signal input ("LINE IN", "TAPE IN" oder "REC IN") on the recording
appli-ance using RCA cables. Please note that some recording equipment can have a slightly detrimental
effect on the audio signal quality. Some recording devices have rather low input impedance, which can
slightly alter the input signal voltage. For maximal music enjoyment we recommend that you connect to
the "REC" terminal only for as long as the recording is actually being made.
38