Battery Life Indicator - Bushnell Fusion 1 Mile ARC 10x42 Bedienungsanleitung

BATTERY LIFE INDICATOR

Battery Indicator:
Full charge
1/2 battery life remaining
Very low charge level (not blinking)
Battery Indicator Blinks - Battery needs to be replaced and unit will not be operable.
UNIT OF MEASURE OPTIONS
he Fusion 1 Mile ARC can be used to measure distances in yards or meters. he unit of measure indicators are
located in the lower right portion of the Matrix Display.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. he crosshairs surrounding the circle will disappear once the power button has been
released (i.e. the laser is no longer being transmitted).
SELECTIVE TARGETING™ MODES
he Fusion 1 Mile ARC was especially designed with hunters in mind. he selective targeting modes allow you to
adjust the performance parameters of the unit to suit your speciic situation and environment. To move from one
mode to another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the
MODE button and quickly release. he diferent targeting modes available and mode indicators are listed below:
Standard with Automatic SCAN (Display Indicator – none) his setting allows most targets to be distanced up
to 1760 yards. Used for moderately relective targets that are typical of most distancing situations. he minimum
10