Use Audio Cable - ultrasone iSAR Bedienungsanleitung

USER GUIDE

10. Use audio cable

Not only can you use the ULTRASONE ISAR wirelessly via Bluetooth
device using the 3.5 mm AUX audio cable supplied and use it wired.
Connect headphones using an audio cable:
Step 1:
Plug one end of the 3.5mm AUX audio cable into the dedicated 3.5mm AUX port on the bottom of the
right ear cup.
Step 2:
Plug the other end of the 3.5 mm AUX audio cable into the 3.5 mm AUX port provided on your end device.
Note
When using the audio cable, the volume and playback controls must be controlled from the source device.
Note
If you unplug the audio cable and are not connected via Bluetooth
Note
If you want to use ANC mode or Ambient Sound, please make sure the audio cable is plugged in properly.
3,5 mm AUX connector
L R
, you can also plug it into your end
®
, the headphones turn off.
®
device
3,5 mm AUX audio cable
32